[ previous ] [ next ] [ threads ]
 
 From:  "Ryan Wagoner" <Ryan at wgnrs dot dynu dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Maybe stupid questions
 Date:  Sun, 9 Apr 2006 10:44:12 -0400
Expanding on this ... I have

DSL -- m0n0wall -- network switch --- computers, linksys router

I use the wireless router as an access point only. In the linksys config
I can disable the WAN interface and then just gave the router a static
ip. In this configuration its just a wireless access point. 

-----Original Message-----
From: Gabe Gall [mailto:gabegall at gmail dot com] 
Sent: Sunday, April 09, 2006 10:28 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] Maybe stupid questions

Here is how I have my DSL/m0n0 connection setup.

DSL <-> m0n0wall <-> Dlink Wireless Router <-> Rest of network:
switches, clients, VoIP, etc.

The m0n0wall handles the PPPoE end and then I have the Dlink wireless
router hooked up into the network using one of the four switch ports.  I
do not use the WAN port on the Dlink at all.

Hope this helps.

Gabe

On 4/9/06, Peter Teunissen <lists at onemanifest dot net> wrote:
>
>
> On 9-apr-2006, at 10:50, Steve Ringwald wrote:
> > Martinez wrote:
> >> Hi!!
> >>
> >> How do I connect my m0n0wall if I have a DSL connection with a 
> >> router (3com wireless)? Do I have to NAT my router to my m0n0?
> >> Is it possible to VPN 2 m0no behind 2 router with dinamic ip?
> >
> > If your router supports DMZ, it is even easier than that; DMZ of the

> > router at the m0n0wall, and it should work without needing the 
> > additional NAT.
>
> Or you could check if your router supports bridge mode. It effectively

> turns of natting, resulting in a transparent box between your 
> phoneline and the m0n0. I'm not sure how the wireless part of your 
> router would fit in, guess you'd better turn that off. I assume you'd 
> want all traffic to go through the m0n0 anyway.
> If setup this way, I don't see anything keeping you from VPN-ing to 
> your m0n0 since the 3com router has become invisible to the data 
> traffic.
>
> Peter
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>