I do assume you are trying it from a machine not behind the m0n0wall
such as something on the internet.

-----Original Message-----
From: fisch [mailto:fisch at conne dash island dot de] 
Sent: Thursday, January 22, 2004 10:58 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] portforwarding

On Thu, 2004-01-22 at 15:23, Mark Spieth wrote:
> http://FIREWALLIP/firewall_nat_1to1.php
> 
> Then add the external and internal mappings. Once that is done go to 
> 
> http://FIREALLIP/firewall_rules.php
> 
> and add the rules to allow traffic on port 80 in and any outbound
> traffic rules you may need.
> 

it doesn't work :(

a) NAT 1:1 (external IP= 16.12.1.3 internal IP= 192.168.11.3)

b) Rules
ACTION: pass
INTERFACE: WAN
PROTOCOL: TCP
SOURCE: any
SOURCE-PORT: HTTP
DESTINATION: single Host (192.168.11.3)
DESTINATION-PORT: HTTP

ACTION: pass
INTERFACE: OPT1
PROTOCOL: TCP
SOURCE: any
SOURCE-PORT: any
DESTINATION: any
DESTINATION-PORT: any

what is wrong?

> Mark
> -----Original Message-----
> From: fisch [mailto:fisch at conne dash island dot de] 
> Sent: Thursday, January 22, 2004 7:00 AM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] portforwarding
> 
> hi,
> how to configure portforwarding from WAN into OPT1?
> I have a static subnet on WAN, an want to forward like this
> WAN			OPT1
> 162.12.1.3:80	->	192.168.11.3:80
> 162.12.1.4:80	->	192.168.11.4:80
> 162.12.1.5:80	->	192.168.11.5:80
> 162.12.1.3:21	->	192.168.11.3:21
> 162.12.1.4:21	->	192.168.11.3:21
> 162.12.1.5:21	->	192.168.11.3:21
> 
> how to set it up with m0n0wall? (I'am not common with WebGui)
> 
> mfg
> fisch
-- 
fisch <fisch at conne dash island dot de>


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch