On Thu, 2004-01-22 at 17:07, Mark Spieth wrote:
> I do assume you are trying it from a machine not behind the m0n0wall
> such as something on the internet.

i try it from the internet

> -----Original Message-----
> From: fisch [mailto:fisch at conne dash island dot de] 
> Sent: Thursday, January 22, 2004 10:58 AM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: RE: [m0n0wall] portforwarding
> 
> On Thu, 2004-01-22 at 15:23, Mark Spieth wrote:
> > http://FIREWALLIP/firewall_nat_1to1.php
> > 
> > Then add the external and internal mappings. Once that is done go to 
> > 
> > http://FIREALLIP/firewall_rules.php
> > 
> > and add the rules to allow traffic on port 80 in and any outbound
> > traffic rules you may need.
> > 
> 
> it doesn't work :(
> 
> a) NAT 1:1 (external IP= 16.12.1.3 internal IP= 192.168.11.3)
> 
> b) Rules
> ACTION: pass
> INTERFACE: WAN
> PROTOCOL: TCP
> SOURCE: any
> SOURCE-PORT: HTTP
> DESTINATION: single Host (192.168.11.3)
> DESTINATION-PORT: HTTP
> 
> ACTION: pass
> INTERFACE: OPT1
> PROTOCOL: TCP
> SOURCE: any
> SOURCE-PORT: any
> DESTINATION: any
> DESTINATION-PORT: any
> 
> what is wrong?
> 
> > Mark
> > -----Original Message-----
> > From: fisch [mailto:fisch at conne dash island dot de] 
> > Sent: Thursday, January 22, 2004 7:00 AM
> > To: m0n0wall at lists dot m0n0 dot ch
> > Subject: [m0n0wall] portforwarding
> > 
> > hi,
> > how to configure portforwarding from WAN into OPT1?
> > I have a static subnet on WAN, an want to forward like this
> > WAN			OPT1
> > 162.12.1.3:80	->	192.168.11.3:80
> > 162.12.1.4:80	->	192.168.11.4:80
> > 162.12.1.5:80	->	192.168.11.5:80
> > 162.12.1.3:21	->	192.168.11.3:21
> > 162.12.1.4:21	->	192.168.11.3:21
> > 162.12.1.5:21	->	192.168.11.3:21
> > 
> > how to set it up with m0n0wall? (I'am not common with WebGui)
> > 
> > mfg
> > fisch
-- 
fisch <fisch at conne dash island dot de>