[ previous ] [ next ] [ threads ]
 From:  "Alex M" <radiussupport at lrcommunications dot net>
 To:  "'Aaron Cherman'" <aaronc at morad dot ab dot ca>
 Cc:  "Monowall Support List" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Bloking NetBios
 Date:  Sun, 16 Apr 2006 17:33:19 -0400
Just tested it... with 3100... 2 desktops go to switch and go to "private"
port on 3100, none of them can see each other after I renewed the IP... and
both of them are on the same subnet

-----Original Message-----
From: Aaron Cherman [mailto:aaronc at morad dot ab dot ca] 
Sent: Sunday, April 16, 2006 5:29 PM
To: Monowall Support List
Subject: Re: [m0n0wall] Bloking NetBios

Subject: RE: [m0n0wall] Bloking NetBios

> Well yes Wirelesses stuff mostly...
> But let's talk bout Ethernet only... because have D-Link DSA-3100 which 
> does
> block Ethernet clients without any problems...

If I understand correctly you can block all wired clients from seeing each 
other using the DSA-3100?  I'm not familiar with this product but from a 
quick read it looks like it uses a type of "port based" VLAN - meaning the 
public port and communicate with the WAN port and the private port can 
communicate with the WAn port, the public and private ports can not 
communicate.  If you do have two clients on (for example) the public port, 
they will be able to see each other unless there is something between them 
to block those specific ports.  So, if you have two clients plugged into a 
switch, they will be able to see each other regardless of whether or not the

3100 is plugged into the switch or not.


To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch