[ previous ] [ next ] [ threads ]
 
 From:  "Ryan Wagoner" <Ryan at wgnrs dot dynu dot com>
 To:  "Lee Sharp" <leesharp at hal dash pc dot org>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] CD Boot Problem
 Date:  Mon, 17 Apr 2006 12:41:18 -0400
I perfer IDE to compact flash adapter with a compact flash card. This way its easy to write the
image. Just stick compact flash card into card reader and attach to desktop. Write image and stick
it in adapter. No need to open computer hookup ide cable, etc.

Ryan


-----Original Message-----
From: Lee Sharp [mailto:leesharp at hal dash pc dot org]
Sent: Mon 4/17/2006 11:06 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] CD Boot Problem
 
From: "Marko Vukovic" <marko at aquamanta dot co dot za>
> On Mon, 2006-04-17 at 08:29 -0500, James W. McKeand wrote:

>> CF is IDE + power. Similar to laptop HDs. Most IDE CF adaptors I have
>> seen have a 40 pin IDE connector, a CF connector and a power connector.
>> The only additional circuitry is for power regulation (a couple of
>> capacitors and a resistor). The traces from the IDE connector go to the
>> CF connector. The traces from the power (floppy or HD molex) connect to
>> the CF connector (with the mentioned electronic components).

> http://www.pcengines.ch/cflash.htm

> I've use the 1E model many times on old hardware. In fact I have one
> running very nicely on a Pentium 166.

http://ec.transcendusa.com/product/ItemDetail.asp?ItemID=TS32MDOM40V
I have used a bunch of these and I love them

                        Lee


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch