That would be because of DHCP. Try to trace back to the origin of the
problem by trying what I suggested..
On 4/26/06, Jonas Öhman <jonas dot ohman at blixtmail dot se> wrote:
> I think my problem is that m0n0wall is missing some routing tables... like
> the gateway ip
> Routing tables
> Destination Gateway Flags Refs Use Netif
> 184.108.40.206/25 link#1 UC 0 0 fxp0
> 220.127.116.11 127.0.0.1 UGHS 0 0 lo0
> 127.0.0.1 127.0.0.1 UH 2 16 lo0
> 192.168.0 link#2 UC 1 0 xl0
> 192.168.0.200 00:30:05:44:3f:37 UHLW 6 512 xl0
> ----- Original Message -----
> From: "sai" <sonicsai at gmail dot com>
> To: "Jonas Öhman" <jonas dot ohman at blixtmail dot se>
> Cc: <m0n0wall at lists dot m0n0 dot ch>
> Sent: Wednesday, April 26, 2006 10:45
> Subject: Re: [m0n0wall] Whats wrong I need some help plz!!!
> if you take a look at http://m0n0ip/status_interfaces.php you should
> find out if you have an ip address from your isp. If you have no IP
> address then reboot your modem and then your firewall.
> This pge will also give you the WAN gateway ip.
> Try to ping the gateway from the m0n0 webgui
> http://m0n0ip/diag_ping.php. This will tell you whether the problem is
> with the m0n0 or your LAN/PC
> On 4/25/06, Jonas Öhman <jonas dot ohman at blixtmail dot se> wrote:
> > As the topic says. I need help to figure out whats wrong with my setup or
> > if it's some other strange problem.
> > My problem is like this..
> > I have a dynamic ip form my isp and using DHCP to recive a lease from the
> > server.
> > I got a "valid" ip in my Interface screen.
> > BUT I'm not able to access the internet or trace or ping any other host
> > only on LAN side...
> > Have been trying to force static ip and no success. I have tried to enter
> > the DNS servers manualy and still same problem.
> > Don't know if i'm right on this one but i used to have another isp with
> > static ip and the " arptable" had some entrys like gateway and so on.
> > Now nothing is there besides lan stuff
> > Please help me if you can... Btw my HW setup works like a charm without no
> > hassle with like ipcop or smoothwall. BUT i dont want to use them
> > // Regards Jonas