[ previous ] [ next ] [ threads ]
 
 From:  "Holger Bauer" <Holger dot Bauer at citec dash ag dot de>
 To:  "Brian McEntire" <brian dot mcentire at gmail dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  AW: [m0n0wall] Re: Soekris WAN port link light but M0n0wall says interface down
 Date:  Tue, 9 May 2006 23:23:57 +0200
You can do this using the hidden config.xml options:
http://doc.m0n0.ch/handbook/faq-hiddenopts.html
 
Holger


	Von: Brian McEntire [mailto:brian dot mcentire at gmail dot com] 
	Gesendet: Di 09.05.2006 21:01 
	An: m0n0wall at lists dot m0n0 dot ch 
	Cc: 
	Betreff: [m0n0wall] Re: Soekris WAN port link light but M0n0wall says interface down
	
	

	Just a thought: I'm guessing this is an autonegotiation issue. The other end
	of the WAN cable plugs into a Linksys 10/100 half/full duplex hub which is
	autonegotiating. It looks like it has some age to it, and the owner of that
	switch says it is unmanaged.
	
	Is there a way to force the LAN port to full duplex? I had to do this once
	before with a different device and it worked.
	
	On 5/9/06, Brian McEntire <brian dot mcentire at gmail dot com> wrote:
	>
	> Anyone seen this?
	>
	> We had a working prototype setup with a generic PC and 3 interfaces (LAN
	> unused, WAN, OPT1). I transferred over the config to the Soekris box,
	> plugged each cable into the respective port on the Soekris box, and powered
	> it up. The link lights come on, but the interface status in monowall says
	> WAN port down.
	>
	> We are running the 45xx v1.22 version of Monowall on the 4502 Soekris (I
	> believe, it was the one with the empty CF card, 3 ethernet ports, and 64 MB
	> RAM.)
	>
	


____________
Virus checked by G DATA AntiVirusKit