[ previous ] [ next ] [ threads ]
 
 From:  "Jonathan De Graeve" <Jonathan dot De dot Graeve at imelda dot be>
 To:  "Michael Whitby" <m dot whitby at gmail dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] IPSEC Pass-Through
 Date:  Fri, 2 Jun 2006 14:46:40 +0200
Clients behind m0n0wall connecting to a remote server that supports
NAT-T isn't an issue, otherwise it is.

J.

-- 
Jonathan De Graeve
Network/System Engineer
Imelda vzw
Informatica Dienst
+32 15/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------

> -----Oorspronkelijk bericht-----
> Van: Michael Whitby [mailto:m dot whitby at gmail dot com]
> Verzonden: vrijdag 2 juni 2006 14:21
> Aan: m0n0wall at lists dot m0n0 dot ch
> Onderwerp: Re: [m0n0wall] IPSEC Pass-Through
> 
> Its possible? Just checking as this page on the FAQ states otherwise:
> 
> http://doc.m0n0.ch/handbook/faq-ipsec-nat-t.html
> 
> and this mailing list entry:
> 
> http://m0n0.ch/wall/list/showmsg.php?id=79/36
> 
> when you say its possible, does it require mapping protocols to
certain
> computers? If it does then it would seems as though multiple
simulataneous
> tunnels are not possible.
> 
> thanks for the reply,
> Michael
> 
> 
> On 6/2/06, Jonathan De Graeve <Jonathan dot De dot Graeve at imelda dot be> wrote:
> >
> > Yes it is.
> >
> > J.
> >
> > --
> > Jonathan De Graeve
> > Network/System Engineer
> > Imelda vzw
> > Informatica Dienst
> > +32 15/50.52.98
> > jonathan dot de dot graeve at imelda dot be
> >
> > ---------
> > Always read the manual for the correct way to do things because the
> > number of incorrect ways to do things is almost infinite
> > ---------
> >
> > > -----Oorspronkelijk bericht-----
> > > Van: Michael Whitby [mailto:m dot whitby at gmail dot com]
> > > Verzonden: vrijdag 2 juni 2006 13:21
> > > Aan: m0n0wall at lists dot m0n0 dot ch
> > > Onderwerp: [m0n0wall] IPSEC Pass-Through
> > >
> > > Hi everyone, sorry to ask this as the FAQ seems to indicate it
isn't
> > > possible, yet I've seen some statements to the contrary therefore
I
> > wanted
> > > to be positive. I want to use m0n0wall but need to have at least 3
> > > computers
> > > from behind the m0n0wall connect to seperate IPSEC VPN servers -
is
> > this
> > > possible?
> > >
> > > Thanks,
> > > Michael
> >
> >