[ previous ] [ next ] [ threads ]
 
 From:  "Bao C. Ha" <bao at hacom dot net>
 To:  Junior Gillespie <junior dot gillespie at gmail dot com>
 Cc:  m0n0wall dash dev at lists dot m0n0 dot ch, m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Cheap Hardware
 Date:  Fri, 2 Jun 2006 12:39:29 -0700
The KBFlash-1 Rev 4 Flashrom sounds like a DOC. Just boot up
FreeBSD 4.11 to see if it recognizes it. If it does, it is
just a piece of cake to load m0n0wall on it.

This machine was known to OEM as the Bcom WinNET II 5BLIP.

Bao

On Fri, Jun 02, 2006 at 11:32:54AM -0500, Junior Gillespie wrote:
> On 6/2/06, Bao C. Ha <bao at hacom dot net> wrote:
> >
> >A couple of weeks ago, I sold a m0n0wall ready machine on eBay
> >for about $20.
> >
> >http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9723142370
> 
> 
> This particular item is the Bocavision JNC205.
> I've personally used these machines for m0nwall and various other
> applications. They function fairly well. Some may recognize this hardware as
> the Wave Wireless SpeedLAN 8300 and 8400 using the Karlnet TurboCell
> protocol for wireless networking. The SpeedLAN product utilizes a KBFlash-1
> Rev 4 Flashrom unit that is mounted by a EEPROM chip on the board.
> 
> Something I've been interested in doing for quite sometime is overwriting
> the OS on the Flashrom with m0n0wall instead of using a CF or HDD. If anyone
> wants to give it a try or has some advice or recommendations for performing
> this task, it would be much appreciated.
> 
> Thanks,
> Junior

-- 
Best Regards.
Bao C. Ha
Hacom OpenBrick Distributor USA http://www.hacom.net
voice: (714) 530-8817 fax: (714) 530-8818
8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38