|
||||||||
I would have no problem trying to get the M0n0wall software certified for the hilton hotels. I would see it as a challenge :) J. -- Jonathan De Graeve Network/System Engineer Imelda vzw Informatica Dienst +32 15/50.52.98 jonathan dot de dot graeve at imelda dot be --------- Always read the manual for the correct way to do things because the number of incorrect ways to do things is almost infinite --------- > -----Oorspronkelijk bericht----- > Van: Lee Sharp [mailto:leesharp at hal dash pc dot org] > Verzonden: vrijdag 16 juni 2006 4:56 > Aan: m0n0wall at lists dot m0n0 dot ch > Onderwerp: Re: [m0n0wall] 2nd management login > > From: "Walter PC" <walterpc at mchsi dot com> > > > They have use client isolation... which does not allow cross-traffic > > between > > clients on the AP... then each switch port has a VLAN tag - back to the > GW > > seperates file sharing and cross-traffic within the infrastructure. > > > Not all Hiltons require this or the Cisco APs even... but they do > require > > hilton > > authentication codes when they log in. > > From the Hilton "High Speed Internet Access Operation & Technical > Standards" > document... "Room to Room Security. The HSIA system must be configured to > completely isolate data traveling to different guestrooms and prohibit the > ability for one guest to view another guest's network traffic. The HSIA > system will block all packets destined for and/or originating from another > room in the hotel." They also require hardware to be on the "approved" > list > which only includes Cisco and Nomadix or IP3 Networks. (However, you can > get around this if you can prove identical functionality) We tried VERY > hard > to get into a Hilton hotel. Now some hotels do what they want anyway, and > just risk getting dinged on an audit. But our guy would not... > > Lee > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > |