[ previous ] [ next ] [ threads ]
 
 From:  "Lee Sharp" <leesharp at hal dash pc dot org>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] m0n0wall to m0n0wall via OPT
 Date:  Mon, 19 Jun 2006 22:58:30 -0500
From: "David Sabo" <dsabo at valeven dot com>


>        m0n0wall A
>        LAN: 192.168.100.0/24
>        WAN: DHCP DSL
>        OPT1: 192.168.120.2

>        m0n0wall B
>        LAN: 192.168.110.0/24
>        WAN: Public IP
>        OPT1: 192.168.120.1

>        m0n0wall A OPT1 - crossover cable - m0n0wall B OPT1

>        If I ping from m0n0wall A OPT1 IP I get response from m0n0wall B
> OPT1 IP, but if I ping from m0n0wall B LAN to m0n0wall A OPT1 IP I don't 
> get
> a response neither the other way.

>        I create the static routes but nothing.

> How should I configure the OPTs interfaces in order to route from
> m0n0wall A LAN to m0n0wall B LAN?

What firewall rules do you have?  Default, nothing is allowed, so you need 
to allow traffic in on the Opt1 interfaces.  You can copy the LAN default 
rule if you wish for testing, but you may not want to have that in 
production.

                            Lee