[ previous ] [ next ] [ threads ]
 
 From:  "Brandon Hamilton" <bhamilton at snowcomputer dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] netbios over IPSEC
 Date:  Tue, 20 Jun 2006 20:37:03 -0600
Tried a reboot
Tried an ipconfig\flushdns
Tried a netstat -RR
Added to lmhosts
Verified hosts not host in correct location
No personal fw software running

It's strange that exchange works, http works, \\192.168.10.200 works,
and \\serveracrossvpn brings  up a window (so it resolves) but the
window shows 0 objects when there's really 10 objects...



-----Original Message-----
From: Chris Buechler [mailto:cbuechler at gmail dot com] 
Sent: Tuesday, June 20, 2006 7:51 PM
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] netbios over IPSEC

On 6/20/06, Brandon Hamilton <bhamilton at snowcomputer dot com> wrote:
>
> I've modified the host file so that the netbios name serveracrossvpn
> resolves to 192.168.10.200.  When I open \\serveracrossvpn it opens a
> window with 0 objects.  If I open \\192.168.10.200 is shows me all the
> shares correctly
>

Maybe something stale in your DNS cache (since you used the hosts
file, which is fine).  Just restart the machine to make sure
everything's cleared out.  Also make sure it is indeed named hosts and
not host, and is in %windir%\system32\drivers\etc.

After you pull up \\serveracrossvpn, you can run a 'netstat -a' from a
command prompt to see what you're actually connecting to.  It sounds
like maybe you're connecting to something other than you're intending.

Your name resolution should be fine as is, no need for WINS or lmhosts
(though you also might want to try putting the hostname and IP in your
lmhosts file).

-Chris

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch