|
||||||||||
Chris, Thank you for your help. It was a fireall rule misconfigure (my bonehead move). It works as it should now. This is my first experience with m0n0wall and a Soekris device and I must say - WOW! Good stuff. Doug -----Original Message----- From: Chris Buechler [mailto:cbuechler at gmail dot com] Sent: Thursday, June 22, 2006 9:47 PM To: Wheeler, Doug (NTC) Subject: Re: [m0n0wall] Mobile (?) VPN and 2 firewalls see anything in your firewall logs? On 6/22/06, Wheeler, Doug (NTC) <Doug dot WHEELER at gapac dot com> wrote: > Sorry - I wasn't very clear. I have no control over the VPN > server (target). When the client is launched, it can not find the > server which is an ip address, not FQDN. > > > > -----Original Message----- > From: Chris Buechler [mailto:cbuechler at gmail dot com] > Sent: Thu 6/22/2006 5:13 PM > To: > Cc: m0n0wall at lists dot m0n0 dot ch > Subject: Re: [m0n0wall] Mobile (?) VPN and 2 firewalls > > > > On 6/22/06, Wheeler, Doug (NTC) <Doug dot WHEELER at gapac dot com> wrote: > > I am implementing a guest network and am mostly interested in using > > m0n0wall for it's captive portal capabilities. > > My configuration is: > > > > Inet <---> Modem <--> Netgear FVX538 <--> m0n0wall <--> switch <--> > > wireless access points. > > <--> local admin staff network > > > > It works great (using Soekris 4801) except I can't use Cisco VPN (Ipsec) > > to access VPN server on Internet. Any ideas? > > > > NAT-T enabled on the Cisco concentrator device (VPN Concentrator, > router, PIX, or whatever)? What specifically do you mean by "can't > use" - will it not connect, or connects but doesn't work, > or... > > -Chris > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > > |