[ previous ] [ next ] [ threads ]
 
 From:  "Holger Bauer" <Holger dot Bauer at citec dash ag dot de>
 To:  "Bezierus" <Bezierus at chello dot no>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Optional device using cross-over cable
 Date:  Sun, 2 Jul 2006 15:14:49 +0200
DNS and default gateway should be set to the optional IP of the m0n0. You also need rules at the opt
interface to allow incoming traffic. the lan clients will be able to connect to the opt clients
unless you have changed the default lan to any rule.

Holger

> -----Original Message-----
> From: Bezierus [mailto:Bezierus at chello dot no]
> Sent: Sunday, July 02, 2006 1:53 PM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] Optional device using cross-over cable
> 
> 
> Trying to set up a single computer on optional device using cross-over
> cable.
> 
> m0n0 is on 192.168.1.1 and this is also my LAN net.
> 
> Should the optional device be at 192.168.2.1 and the computers ip at
> 192.168.2.2
> and what should the gateway and dns be 192.168.2.1 or 192.168.1.1
> 
> or to i have to set firewall rules to permit traffic to 
> optional devices.
> 
> Thanks in advance for any help and if you need some info let me know
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> 

____________
Virus checked by G DATA AntiVirusKit