[ previous ] [ next ] [ threads ]
 From:  tnelson at fudnet dot info
 To:  "Craig FALCONER" <cfalconer at avonside dot school dot nz>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] Nokia IP380
 Date:  Mon, 10 Jul 2006 10:42:29 -0500 (CDT)
I'm also working on an IP330... see my seperate thread about that happy
piece of hardware... ;-)  I would like to stick with monowall for its
smaller footprint and rock solid stability over pfSense. The cable I'm
using  has all 9 pins. I am able to get into the BIOS just fine...

--Tim Nelson

> Strange.
> I have an IP330 that works pretty well (apart from being clocked locked to
> 166 MHz.)
> Have you tried pfSense instead?  Also, are you sure your null modem
> cable/console cable is good enough?  I had a three wire one that allowed
> me
> to watch the boot messages, but not to get into the bios or onto a console
> after booting.
> http://criggie.dyndns.org/tech/ip330/   <-- info and pics on mine.
> -----Original Message-----
> From: Tim Nelson [mailto:tnelson at fudnet dot info]
> Sent: Saturday, 8 July 2006 11:37 a.m.
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] Nokia IP380
> Hello! I recently acquired a Nokia IP380 and am having some issues getting
> it to boot. I'm a 'veteran' when it comes to m0n0wall installation but
> this
> one stumps me. I know the image installation process worked just fine as I
> am able to boot the drive in any other machine with no problems. I've
> enabled access via the serial port and am able to watch it boot.
> Everything
> seems fine until the kernel initializes the ide controller(s). It slows
> down
> at the point and stops abruptly after initializing some sort of UHCI
> device.
> There are no options in the BIOS for a USB controller or anything similar.
> Is there a kernel parameter I can pass upon boot to disable this device?
> Do
> I need a custom kernel? Help!!!
> --Tim Nelson
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch