The cheat sheet I use is available at:

http://www.linux-wlan.org/docs/wlan_adapters.html

Anything prism2/2.5/3 will work just fine with hostap, IIRC. In the case
of the WMP11's, so long as its an older card it will work fine (per the
referenced document, newer releases use a different chipset). Perhaps
the h/w revision or date of manufacture is on the box?

HTH (an acronym I never used before I "met" Manuel :)

Brian

On Sun, 2004-01-25 at 06:45, Richard Morrell wrote:
> I am going to build my first 3 NIC + WLAN box for proper deployment on 
> test here later. I happen to have had sat on the shelf for last two 
> months shrink wrapped some Linksys WMP11 PCI cards which would be ideal.
> 
> Before I start installing has anyone tried these or know if they are 
> supported ? Sods law would guarantee I gave away a load of other cards 
> the other week.
> 
> Richard
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>