[ previous ] [ next ] [ threads ]
 
 From:  "Chris Sandy" <sandyc at corp dot netcarrier dot com>
 To:  "Jason P Jones" <jjones at integracon dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Editing rootfs image and Creating CF image
 Date:  Mon, 26 Jan 2004 08:22:18 -0500
Must be the mcse ;P 

But really, what system are you unpacking the image too? What editor are
you using to modify the files?


-----Original Message-----
From: Jason P Jones [mailto:jjones at integracon dot com] 
Sent: Sunday, January 25, 2004 11:25 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] Editing rootfs image and Creating CF image

I just tried this again, after unpacking the .img (again, this is the
plain,
vanilla, downloaded image), then ONLY re-packing it again with the
script
(again no errors)-- I made no changes to the file system, and still no
luck-
I can not ping or otherwise see the FW... This of course points to
something
not right in the unpack / pack procedure for me, or something I'm just
leaving out...

Jason P Jones
MCSE+I,MCT,CCNA,LCP,CCA,CNA,CIWA,INET+,Network+,A+
Integracon Technologies
865.382.7400  

-----Original Message-----
From: Jason P Jones [mailto:jjones at integracon dot com] 
Sent: Sunday, January 25, 2004 10:21 PM
To: 'Michael Iedema'; m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] Editing rootfs image and Creating CF image


Thank you for the assistance, 
Since the last email I installed FreeBSD 4.9, installed the ports I
needed,
unpacked the .img using your script, edited my configs as I wanted, and
repack them into an image (also using your script). When I try to
recreate
the image with -x it runs and creates an image file, I can load this
image
to a CF card using the physdisk util on Windows, but I never get any
response from the firewall for a ping / etc after a reboot. I did not
change
anything significant, as I just wanted to test.  Any ideas? 

Jason P Jones
MCSE+I,MCT,CCNA,LCP,CCA,CNA,CIWA,INET+,Network+,A+
Integracon Technologies
865.382.7400  

-----Original Message-----
From: Michael Iedema [mailto:iedemam at pluto dot dsu dot edu] 
Sent: Sunday, January 25, 2004 2:22 PM
To: 'Jason P Jones'; m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] Editing rootfs image and Creating CF image


> Hello,
> I'm interested in editing the downloaded rootfs image and then 
> creating a CF .img file- just like the downloadable one, for the 
> soekris net45xx boxes. I
> will be doing this on either Gentoo or W/XP. I do like the ease of the
> physdiskwrite utility, so Windows instructions would be 
> handy, but I use
> linux just as much so... 

As far as I know there is no way to unpack and edit the images in
windows.
My Linux stupidity is showing through here, but if there is a 'vn'
device
equivalent then a quick edit of my unpacker script should get you going
(http://mrkasai.undergroup.com/m0n0wall).  Otherwise I would find a
tired
old box and throw FreeBSD 4.9 on it.  That's the easiest route, and the
route the hackers guide
(http://m0n0.ch/wall/hack/) was written for.

Hope that helps,
--Michael I.


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch