Would you please specify the IP of the computer you are connecting from
to the PPTP server (NOT the IP of the logical PPTP interface).
David Moron schrieb:
> I'm using monowall 1.22 and I'm trying to configure the PPTP access.
> I can connect via PPTP to monowall correctly, I can browse through the
> PPTP tunnel but I can't access the LAN workstations.
> All the traffic is allowed in the PPTP interface
> PPTP VPN Rules:
> Proto Source Port Destination Port
> * * * * *
> LAN IP: 126.96.36.199 (I know it's a public address but I'm not allowed
> to change it)
> PPTP Config:
> Enable PPTP Server
> Server Address: 188.8.131.52
> Remote Address Range: 184.108.40.206/28
> Traceroute from the PPT Client to 220.127.116.11 suceess only to the first
> hop 18.104.22.168.
> Ping to the PPTP client IP from monowall on the LAN interface reports:
> "ping: sendto: No route to host"
> Ping to the LAN workstation 22.214.171.124 from monowall works OK.
> ipconfig on the PPTP client:
> PPP Adaptor:
> IP: 126.96.36.199
> mask: 255.255.255.255
> gateway: 188.8.131.52
> Has anyone an idea whats happening?
> Thak you in advance,