I don't know how to explain it.
I just reboot m0n0 and now I can access my CCTV server from outside (WAN)
I did nothing, for 3 days all the rules in NAT and FIREWALL was there.
I just reboot now (for I don't know which reason) and now it's working!
Mistery!
Anyway thanks so much

On 7/26/06, Dr Who <brokenby2703 at gmail dot com> wrote:
> Hi
> first of all thanks for your time.
>
> Remote control is made using IE.
> (Funny that Firefox can't view properly, as usual web developer
> thinking on IE only).
>
> Connection are very simple:
> http://address_of_the_server
> default port is 80!
>
> When you try like this a default home page is displayed with a request
> of user login but not in a separate windows (like ftp access).
>
> I did try to the server to activate Windows Firewall (well, if we can
> call it firewall) and block all the ports except port 80 in TCP.
> From the 2nd PC I try to login and it went through perfectly.
> Meaning that probably is using only port 80.
>
> I did try netstat-n while trying to login and found that is opening
> port 80 and 8081
> Of course it hang during login process with the same result and error
> msg as before (the reason why i'm here) that is "NETWORK CONNECTION
> FAILED"
>
> So I went on m0n0 and open port 80, 8080 to 8090 towards the server.
> But still can't connect and return same error.
> What could it be ?
>
>
> On 7/26/06, C. Andrew Zook <andrewzook at pdqlocks dot com> wrote:
> > Are you sure that it isn't SSL or an FTP server? On your client, run a
> > "netstat -n" to see your connections.
> >
> > Andy
> >
> > Dr Who wrote:
> > > Hi to everybody.
> > >
> > > I have a problem with my CCTV system running on WinXP and Kodicom card.
> > > This system is offering a webserver that can be accessed from remote
> > > to check and monitor the CCTV system.
> > > As the system was running around Apache (for windows) i was thinking
> > > that normal http ports to be opened was enought (80, 8080,etc) but I
> > > was wrong.
> > >
> > > It's about 3 days that I can access the webserver from remote, the
> > > homepage of the system is loaded properly but it fail the login
> > > process.
> > > This is I'm using M0n0 and ADSL modem in PPPoe as WAN
> > >
> > > If I connect the modem directly to this dedicated PC and setup a
> > > broadband connection (for ADSL), everything is working smooth from
> > > remote.
> > >
> > > There are 2 pc in the LAN, and the other PC can access this webserver
> > > perfectly.
> > > Please note that Windows Firewall has been disable for the moment.
> > >
> > > Both PC are in the LAN (I did not connect this PC on OPT1 because
> > > sometimes I need to share some files) and I tried to open as many
> > > ports in M0n0 towards this PC but no success.
> > >
> > > Last just now, I tried to open (firewall and NAT) all ports from 1 to
> > > 65535 towards this PC (192.168.0.22) but still the same problem:
> > > webpage can load, login failed after loaded the graphic interface.
> > >
> > > I believe it's a problem of setting in the M0n0 as the 2nd PC can
> > > access this webserver without any problem.
> > >
> > > I tried to scan the ports (listening) on this PC but it returned only
> > > 80,123,137
> > > I did check and really port 80 is NAT to this PC.
> > >
> > > Please help
> > > Thank you
> > > D.
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > >
> >
> >
> >
> >
>