[ previous ] [ next ] [ threads ]
 
 From:  Mark Phillips <g7ltt at g7ltt dot com>
 To:  Jim Thompson <jim at netgate dot com>
 Cc:  Chris Buechler <cbuechler at gmail dot com>, m0n0wall <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] WiFi on WRAP again again again
 Date:  Mon, 31 Jul 2006 15:41:27 -0400
This I might abandon this.

Instead I'll use the captive portal feature on the 3rd LAN port and put
an access point on it. Not as elegant but much less hassle and a "quick
win" for my boss.

Thanks to all whom advised.

Mark 

On Mon, 2006-07-31 at 09:31 -1000, Jim Thompson wrote:
> Try running pfsense on the board.  Its likely that your WLG500 has too 
> new a chipset to be supported by the 1.2b7 (FreeBSD 5.x based) image.   
> pfSense is FreeBSD 6.1-based.
> 
> If it works on pfSense, but not monowall 1.2b7, then you'll either have 
> to run one of the 6.1-based m0n0wall "beta" images, run pfSense, wait 
> for m0n0wall to officially be based on 6.1, or "roll your own".
> 
> If you're running a m0n0wall image outside the 1.2b5 - 1.2b7 range 
> **including** the 1.22/1.23bX series (and its not one of the 6.1-based 
> 'alpha/beta' images), then the problem is ... obvious.   FreeBSD 4.11 
> didn't support *any* 802.11a or 802.11g cards.
> 
> Jim
> 
> Mark Phillips wrote:
> > Hi Chris et al,
> >
> > I have a model WLG500-3B 802.11a/b/g card
> >
> > There is no 4th interface in the gui either.
> >
> > Mark
> >
> > On Mon, 2006-07-31 at 13:44 -0400, Chris Buechler wrote:
> >   
> >> On 7/31/06, Mark Phillips <g7ltt at g7ltt dot com> wrote:
> >>     
> >>> I have checked that the card works by putting it into my laptop - all
> >>> ok. When installed into my WRAP I expected to see an extra port listed
> >>> on the console but all I see is the 3 SISx ports.
> >>>
> >>>       
> >> When you go to assign interfaces in the GUI, it only shows 3 sis ports
> >> as well?  What's the exact card you have?
> >>
> >> -Chris
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> >> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >>
> >>
> >>
> >>     
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >   
> 
> 
>