From: "Adam Costello" <adam at mini dash byte dot com>

> I'm trying to use a VIA VT-310DP motherboard with m0n0wall
> (http://www.via.com.tw/en/products/mainboards/mini_itx/vt_310dp/). I 
> follow
> the normal procedure with the CF card etc etc. However, when I turn on the
> machine to boot m0n0wall, it hangs after doing the CPU and memory tests. 
> It
> does recognise that the CF card is there and is the primary HDD. I've 
> tried
> playing with the BIOS settings and have checked for a BIOS update (there
> isn't one) but it still hangs at the same point. I'm using the Casetronic
> FB-4652 CF Adaptor and a Scandisk CF Card. I have also tried about 4 or 5
> different IDE/CF adaptors (1 SATA/CF adaptor) and CF cards. All my
> combinations of adaptors and cards work with the WRAP boards I normally 
> use.

Will it work with a normal hard drive?  Quickest way to find out if it is a 
CF detection problem, or the board needs drivers not in m0n0.

                                Lee