[ previous ] [ next ] [ threads ]
 
 From:  "David Kitchens" <spider at webweaver dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Passive ftp problem
 Date:  Tue, 15 Aug 2006 21:53:48 -0400
Ok, egg on my face... I tried getting Cuteftp to write logs but it wasn't
so I upgraded it to the latest 8.0 version and everything works fine. The
logs it made now definitely show me using passive and listing files now
works. 

COMMAND:>	[8/15/2006 9:31:39 PM] PASV
		[8/15/2006 9:31:39 PM] 227 Entering Passive Mode
(192,168,16,107,21,126).
COMMAND:>	[8/15/2006 9:31:39 PM] LIST
STATUS:>  	[8/15/2006 9:31:39 PM] Substituting received PASV address
192.168.16.107 to server address X.X.X.107.
STATUS:>  	[8/15/2006 9:31:39 PM] Connecting FTP data socket...
X.X.X.107:5502...
		[8/15/2006 9:31:39 PM] 125 Data connection already open;
Transfer starting.
		[8/15/2006 9:31:39 PM] 226 Transfer complete.
STATUS:>  	[8/15/2006 9:31:40 PM] Directory listing completed.
STATUS:>  	[8/15/2006 9:31:47 PM] Getting listing "/www"...
COMMAND:>	[8/15/2006 9:31:47 PM] CWD /www
		[8/15/2006 9:31:47 PM] 250 CWD command successful.
STATUS:>  	[8/15/2006 9:31:47 PM] PWD skipped. Current folder: "/www".

> -----Original Message-----
> From: Chris K Ellsworth [mailto:ckellsworth at yahoo dot com] 
> Sent: Tuesday, August 15, 2006 8:44 PM
> To: David Kitchens
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] Passive ftp problem
> 
> well the only way i know to help is to see the Full log from 
> the client side app, I could probably tell you pretty quickly 
> if it was a ftp setting error or something else.
> 
> On Aug 15, 2006, at 5:28 PM, David Kitchens wrote:
> 
> >  Cute FTP uses passive by default as do most ftp client 
> programs to my 
> > knowledge. Also since I didn't mention it in first mail, I am using
> > 1.23b1
> > on a soekris 4511, the servers are in a VLAN on my Cisco 
> 2924 switch.
> >
> >> -----Original Message-----
> >> From: Chris K Ellsworth [mailto:ckellsworth at yahoo dot com]
> >> Sent: Tuesday, August 15, 2006 7:41 PM
> >> To: m0n0wall at lists dot m0n0 dot ch
> >> Subject: Re: [m0n0wall] Passive ftp problem
> >>
> >> did you tell cuteftp to use passive mode?
> >> On Aug 15, 2006, at 3:43 PM, David Kitchens wrote:
> >>
> >>> Guys, I know this has been hashed out MANY times but I am
> >> still stuck.
> >>> I've recently moved a MS 2003 server behind my m0n0wall, it has a 
> >>> static ip configured under Server NAT and its got a Proxy
> >> Arp setting
> >>> as well. Ports 80, 443, 25, and 110 work with no problems,
> >> port 20 and
> >>> 21 are mapped for ftp tho I don't think I need 20 as msftp
> >> runs on 21.
> >>> External ip is
> >>> x.x.x.107 and internal ip is 192.168.16.107. I have set the ftp 
> >>> service to use 5500-5700 per 
> >>> http://support.microsoft.com/Default.aspx?
> >>> id=555022 and
> >>> created an Inbound NAT entry and Rule pointing that range to the 
> >>> internal ip. I can connect to the ftp server without a 
> problem from 
> >>> the outside but I get an Error: Failed to establish data socket, 
> >>> Trashed response received,
> >>> 425 Can't open data connection. No directory listing can be shown.
> >>> I am
> >>> using Cute FTP when trying to connect but I don't think that has 
> >>> anything to do with it. Attempted to connect using IE as
> >> well and get
> >>> no listing, tried setting IE to not use Passive connection
> >> and still
> >>> get errors.
> >>>
> >>> Does anyone use passive ftp with a 2003 server? Can 
> someone tell me 
> >>> WTF I am missing please?
> >>>
> >>> Dave