[ previous ] [ next ] [ threads ]
 
 From:  "jan gestre" <m0n0wall dot list at gmail dot com>
 To:  "Christopher M. Iarocci" <iarocci at eastendsc dot com>
 Cc:  m0n0wall <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] does not detect replacement interfaces
 Date:  Thu, 14 Sep 2006 10:33:00 +0800
On 9/14/06, Christopher M. Iarocci <iarocci at eastendsc dot com> wrote:
>
> Your config file is already set up to use the old cards.  The setup only
> takes place the first time you boot the machine.  After that, you need
> to mod your config.  I might be wrong, but you might have to manually
> modify your XML file to show the drivers for the new cards.  Is there a
> way to do the auto-config over again?



i use the option number 1 on the console menu which to assign network cards
and use auto detection but it did not work, is there a way to do it aside
from what you're recommending? i have no experience  in editing xml files :(


>
> > hi guys,
> >
> > i'm trying to replace the LAN and WAN old (xl0 and dc0) interface of my
> > monowall box with a new linksys eg1032 but monowall does not detect
> > the said
> > linksys eg1032 interface, i already checked the hardware compatibility
> > list
> > and it is listed as a compatible device, any ideas as to why my monowall
> > does not detect the devices?
> >
> > TIA
> >
>
>