[ previous ] [ next ] [ threads ]
 
 From:  Joe Commisso <jemc at bluefrog dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] WAN has no link light at one location, but works at home
 Date:  Sat, 14 Oct 2006 16:52:18 -0400
Sorry, I meant to say:
You don't suppose the *static dsl* modem requires a crossover cable do you?
I used two straight through which both worked on the wireless router, 
but not the wrap m0n0wall.

I am going to try again with the crossover but it will take a few days 
to arrange our schedules...
Joe




Joe Commisso wrote:
>
> You don't suppose the cable modem requires a crossover cable do you?
> I used two straight through which both worked on the wireless router, 
> but not the wrap m0n0wall.
> Joe
>
>
>
>
> Joe Commisso wrote:
>> Hello,
>>
>> I have a strange problem.
>> My box is a wrap model and it works fine at home.
>> My verizon isp gives me a non-static ip address and I have a cheap 
>> belkin router connected to that so I don't have to fuss with the 
>> pppoe user and password all the time.
>> The local side of the router allows static ip addresses on the subnet 
>> of 204.168.2.0
>> Like I said, the m0n0wall 1.22 works fine here.
>> I only have one wan rule that allows https web gui access.
>> Proto      Source      Port      Destination            
>> Port                      Description
>> TCP       *               *        WAN address       443 (HTTPS)
>> And the lan rule is
>> Proto      Source      Port      Destination            
>> Port                       Description
>> *       LAN net             *           *                        *
>>
>> I found this doc:
>> http://doc.m0n0.ch/handbook/troubleshooting-nolinklight.html
>>
>> Which suggests a bad ethernet port, but it works here at home before 
>> and after I tried it on a static dsl modem.
>>
>> I do not have a link light when connecting to the static dsl modem, 
>> but if I connect the linksys wireless router that was there, it has a 
>> link light and internet.
>> At home here I have a link light and internet. In fact I am using the 
>> m0n0wall as my gateway right now.
>>
>> Any suggestions?
>> TIA,
>> Joe
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>