From: "John Sommatino" <john at wombo dot com>

> Is there a way to set secondary IP address and network on the LAN port?

Man, this was just a yesterday...

----- Original Message ----- 
From: "Lee Sharp" <leesharp at hal dash pc dot org>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Friday, November 03, 2006 11:15 AM
Subject: Re: [m0n0wall] IP aliases


> On Fri, 2006-11-03 at 14:36 -0300, Charrua wrote:
> 
>> how I configure ip aliases in the lan interface? I need the next 
>> configuration:
>> 
>> WAN = ADSL
>> 
>> LAN = 192.168.99.1/255.255.255.128
>>              192.168.100.1/255.255.255.128
> 
> First, this is considered bad network practice, and not recommended.
> Second, this is very insecure.  Third, it is not easy, and requires
> unsupported command line operations.
> 
> The correct way to do it is to add another interface, or use a V-LAN.
> However, if you must do it, look for Chris's post about why this is bad
> for instructions. :-)
> 
> Lee
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>