[ previous ] [ next ] [ threads ]
 
 From:  Christiaens Joachim <jchristi at oce dot be>
 To:  "'boner'" <boner at mac dot com>, m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] re: cd image to flash?
 Date:  Thu, 17 Jul 2003 11:00:31 +0200
It seems you used the CD image to write to the CF instead of the CF/HDD
standard PC image. Why?

If you write the CF/HDD image to your CF (with physdiskwrite), then all
should go swell, as I tested it that way...

With the CF/HDD image, the XML configuration file is stored on the CF/HDD
and not on a floppy.

http://www.initec.be/m0n0/downloads/generic-pc-pb13r443.img
<http://www.initec.be/m0n0/downloads/generic-pc-pb13r443.img>  (on our
Belgian mirror)

Hope it helps...
Joachim



		-----Original Message-----
		From:	boner [mailto:boner at mac dot com]
		Sent:	Thursday, July 17, 2003 6:35 AM
		To:	m0n0wall at lists dot m0n0 dot ch
		Subject:	[m0n0wall] re: cd image to flash?

		let me be a little more specific regarding the problem i'm
having.
		used physdiskwrite 0.3 in xp to write image to cf card.

		shutdown, unplug windows hd, reboot.
		bios recognizes card as drive.

		i'm able boot (from cf) and get all the way to the console
setup, but right
		above the menu are the following errors(and a few messages
prior to error):

		ad2: 61MB <Hitachi CVM1.1.1> [978/4/32] at ata1-master PIO1
		Mounting root from ufs:/dev/md0c
		mount: /dev/ad0a: Device not configured

		Warning: fopen(/conf/config.xml)
[http://www.php.net/function.fopen]: failed
		to create stream: No such file or directory in
/etc/inc/xmlparse.inc on line
		121
		Error: could not open XML input

		this last line repeats twice.
		the only setup option which seems to work is reset to
factory options, which
		ends up in a reboot.

		i can get to the ok promt if i hit the "any" key during the
kernel spinner,
		but i'm not really sure what options i can pass at that time
to get passed
		the error listed above. any suggestions?
		steve 


	
---------------------------------------------------------------------
		To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
		For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


-----------------------------------------------
MISSION STATEMENT 
-----------------------------------------------

effectively by offering innovative print and document management products
and services for professional environments.

-----------------------------------------------
DISCLAIMER 
-----------------------------------------------
This e-mail message and any attachment are intended for the sole use of the
recipient(s) named above and may contain information which is confidential
and/or protected by intellectual property rights.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form) by
other persons than the designated recipient(s) is prohibited.

If you have received this e-mail in error, please notify the sender either
by telephone (0032-2-729.48.11) or by e-mail and delete the material from
any computer.
Oce-Belgium/Oce-Interservices is nor responsible for the correct and
complete transfer of the contents of the sent e-mail, neither for the
receipt on due time.  This e-mail message does not bring about a contractual
obligation for Oce-Belgium/Oce-Interservices.

Thank you for your cooperation.

For further information about Oce-Belgium/Oce-Interservices please see our
website at www.oce.be

-----------------------------------------------