|
||||||||||
Hi Bruce, Manuel give me this image to make a test. I've already tested yesterday with my "broken" CF card. All is working now... http://www.m0n0.ch/temp/net45xx-pb14r458.img Bye Roberto -----Messaggio originale----- Da: bmah at intruder dot kitchenlab dot org [mailto:bmah at intruder dot kitchenlab dot org]Per conto di Bruce A. Mah Inviato: venerdi 8 agosto 2003 6.04 A: Manuel Kasper Cc: Roberto Zilli; m0n0wall at lists dot m0n0 dot ch Oggetto: Re: [m0n0wall] pb14 is out If memory serves me right, Manuel Kasper wrote: > On Wed, 6 Aug 2003, Roberto Zilli wrote: > > > The boot seems ok, but when the kernel is loaded something goes wrong, > > the loading is VERY slow. > > I've try another CF to be shure about this failure. It't working on my desk > ! > > The working well CF card is a SanDisk. > > Umm, OK, so at least the boot1 stage is OK. Hmm, I'm not so sure anymore > that I didn't accidentally overwrite the patched loader (it needs a patch > to read only one sector at a time, too) with an unpatched version. > > The problem is just that I don't have a "broken" CF card, so I can't test > it myself. I'll have a look this evening and make another image available > with a known-patched loader so you can test again, if you don't mind. Just a "me too"... I'm seeing similar behavior here, with a Crucial Technology 256MB card (which didn't work at all with a pb13 image) in a Soekris 4501. An annotated (manual) screen-scrape looks like: ----- BIOS drive C: is disk0 BIOS 639kB/64512kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (root at nb dot neon1 dot net, Mon Jul 28 20:31:49 CEST 2003) - <--- Very slowly twirling cursor here Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel]... <--- Long pause here can't load 'kernel' <--- Long pause here can't load 'kernel.old' Type '?' for a list of commands, 'help' for more detailed help. ok ----- A 32MB SanDisk card in the same 4501 works fine. Cheers, Bruce. |