Hi Alex,

mission complete ;)

Seems to be only working with version > 1.22

many thx

----- Original Message ----- 
From: "Alex M" <radiussupport at lrcommunications dot net>
To: "'Hans Mojave'" <root1981 at gmail dot com>; "Monowall Support List" 
<m0n0wall at lists dot m0n0 dot ch>
Sent: Wednesday, January 10, 2007 8:53 PM
Subject: RE: [m0n0wall] LEDs on Wrap board


> Yes for some reason it doesn't work through exec.php, I would assume 
> that's
> is because the exec.php is located 2 levels down from main dir
>
> Normally the path indicated "echo f5> /dev/led/led2" would be used as if 
> you
> are logged in under root's main dir
>
> If some one has access to the file structyure can you look up how many
> leveles ecactly would main dir be located? I remember something like
> /www/somedir/pages I don't remember, I have to turn on WM and im too lazy 
> at
> the moment
>
>
>
>
> -----Original Message-----
> From: Hans Mojave [mailto:root1981 at gmail dot com]
> Sent: Wednesday, January 10, 2007 2:20 PM
> To: Alex M; m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] LEDs on Wrap board
>
> Hello Alex,
>
> do i have to do that via exec.php?
> The result there is:
>
> -----------
> $ echo f5> /dev/led/led2
> cannot create /dev/led/led2: directory nonexistent
> -----------
>
> also with /dev/led/led1 and 3
>
> Any idea?
>
> Best regards
> Hans
>
>
> ----- Original Message ----- 
> From: "Alex M" <radiussupport at lrcommunications dot net>
> To: "'Hans Mojave'" <root1981 at gmail dot com>; "Monowall Support List"
> <m0n0wall at lists dot m0n0 dot ch>
> Sent: Wednesday, January 10, 2007 4:16 AM
> Subject: RE: [m0n0wall] LEDs on Wrap board
>
>
>> You can send the commands using shell to the leds:
>>
>> echo 1 > /dev/led/led2     <- Turns LED 2 on
>> echo 0 > /dev/led/led2     <- Turns LED 2 off
>> echo fx> /dev/led/led2     <- Flashes LED 2 at intervals where x=1-9.  1
>> is
>> fastest 9 is slowest
>>
>> Have fun!
>>
>> -----Original Message-----
>> From: Hans Mojave [mailto:root1981 at gmail dot com]
>> Sent: Tuesday, January 09, 2007 5:37 PM
>> To: m0n0wall at lists dot m0n0 dot ch
>> Subject: [m0n0wall] LEDs on Wrap board
>>
>> Hi there,
>>
>> i build a monowall on a Pc-Engines Wrap1E2 today. Wonder if there is a 
>> way
>> to use the 3 front LEDs for some stuff. Left led is power, but the other
>> two
>> seem to be unused.
>>
>> One for traffic and the other one for Firewallfilter or something would 
>> be
>> nice.
>>
>> Does anybody know a way to do that with monowall?
>>
>> best regards and sorry for bad englisch
>> Hans
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>