[ previous ] [ next ] [ threads ]
 
 From:  Peter Boosten <peter at boosten dot org>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] VLAN
 Date:  Tue, 16 Jan 2007 22:22:33 +0100
mtnbkr wrote:
> Peter Boosten wrote:
>> Hi all,
>>
[snip]
> 
> First, you need to set the baystack port to "tagged trunk".
> 
> Next, you need to create another VLAN and assign it to that port. Call
> the VLAN what you like, but this will be for the 192.168.13.0/24 network.
> 
> I believe that here is where you went wrong:
> On the m0n0wall, in the Interfaces --> Assign page you need to configure
> your LAN interface to be the same VLAN that you just added to the
> baystack port for the 192.168.13.0/24 network.

Bill,

Thanks for your answer.
So what you're basically saying is that one of the VLANs needs the same
IP address as the LAN interface?


> 
> If your LAN interface is currently assigned to the hardware interface
> (sis0 on wrap - I do not know what m0n0 sees the ethernet ports as on a
> soekris) it will not work. The LAN interface needs to be on the correct
> VLAN.
> 

This doesn't make sense: since it's a trunk, it'll be on several VLANs,
right?

Peter