[ previous ] [ next ] [ threads ]
 
 From:  "Alex M" <radiussupport at lrcommunications dot net>
 To:  "'Semtec'" <semtecx at gmail dot com>, "Monowall Support List" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] D-LINK DWL-520 V.E1
 Date:  Mon, 22 Jan 2007 13:47:43 -0500
To me eat seams that the command being send to nonexistent card (wi_cmd
0x0000 where 0x0000 means send command to NULL) well at leas that what my
windows brain is thinking. I would try remove the card, boot without it then
put card back in and boot with it installed, it might reassign the address
(that what windows would do)


-----Original Message-----
From: Semtec [mailto:semtecx at gmail dot com] 
Sent: Monday, January 22, 2007 4:36 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] D-LINK DWL-520 V.E1

I got a D-LINK DWL-520 V.E1 which makes theses outputs while booting

 

wi0: <Intersil Prism2.5> mem 0xe1000000-0xe1000fff irq 10 at device 11.0 on 

pci0

wi0: timeout in wi_cmd 0x0000; event status 0x0000

wi0: wi_cmd: busy bit won't clear.

: init failed

 

I cant get the card running. Any ideas?

 

Thanks

 

Luke