|
||||||||
I forgot, Replace the 192.168.2.1 with the IP address of your m0n0wall and remove the https:// and exchange it with http:// if you are not running SSL. Mark -----Original Message----- From: Mark Spieth [mailto:mspieth at neod dot net] Sent: Saturday, January 31, 2004 2:49 PM To: 'Cody Pisto'; m0n0wall at lists dot m0n0 dot ch Subject: RE: [m0n0wall] m0n0wall as non-nat router? Yes https://192.168.2.1/firewall_nat_out.php check Enable advanced outbound NAT Without any other rules on that page, Nat will disable. -----Original Message----- From: Cody Pisto [mailto:cody at hpcs dot com] Sent: Saturday, January 31, 2004 1:33 PM To: m0n0wall at lists dot m0n0 dot ch Subject: [m0n0wall] m0n0wall as non-nat router? Is it possible to use m0n0wall as a non-nat router? IE: Wan port is a real internet routable address, all ips on local lan are real routable addresses, and all ips on dmz port are also all real routable internet ip addresses? -Thanks --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |