[ previous ] [ next ] [ threads ]
 
 From:  "Peter Parnican" <monowallboy at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  USB stick
 Date:  Wed, 31 Jan 2007 21:21:14 +0100
Hi guys,
i wanted to use new funcionality and to save config file to USB stick but it
doesn't work for me.
Maybe its PC problem, definitely its not possible to boot from USB for bios
limitation but im surprised that i can not save config to USB stick when
mono know about this storage. I can see size of USB stick and other details
but no chance to save config on it.

I have tryed different format FAT, FAT 32 but after mono reboot im getting
default configuration.
Any idea? Or this old 333Mhz Centrino is not supported to work with usb...


Here is message (when booting):

usb0: ohci version 1.0, legacy support
usb0: acerlabs m5237 aladdin...
usb0: USB revision 1.0
uhub: 2 ports with 2 removable, self powered
umass0: vendor 0x3538 USB Mass Storage Device, rev.2.00/1.00, addr 1
...
...
da0 at umass-sim0 bus target 0 lun 0
da0: Generic USB Flash Disk 0.00 Removable Direct Access SCSI-2 device
da0: 650kb/s transfer
da0: 250MB (512000 512 byte sector: 64H 32S/T 250C)

It looks like mono should be able to work with this USB stick...