[ previous ] [ next ] [ threads ]
 
 From:  Lonnie Abelbeck <lists at lonnie dot abelbeck dot com>
 To:  m0n0wall List <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Extending factory network
 Date:  Sun, 11 Feb 2007 16:26:20 -0600
Beau,

You might try checking (enabling) the option...

System -> Advanced -> "Bypass firewall rules for traffic on the same  
interface"

On the WRAP 1 side, where you are seeing dropped packets.

Lonnie

On Feb 11, 2007, at 4:17 PM, Beau Woods wrote:

> Its odd because I can ping all of the interfaces on WRAP2 from the  
> computer
> connected to it, it's just when I try to ping anything on the other  
> wrap
> that it wont do.  I had a look in the logs on wrap1 and the IP  
> address is
> coming up but with a cross next to it.  I think in may be getting  
> block??  I
> thought that having ANY,ANY,ANY rules would let it all pass?
>
> Thanks
> Beau
>
> -----Original Message-----
> From: Beau Woods [mailto:info at mazatecsolutions dot com dot au]
> Sent: Monday, 12 February 2007 9:09 AM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: RE: [m0n0wall] Extending factory network
>
> Computer 1 on WRAP1
> ====================================================================== 
> =====
> Interface List
> 0x1 ........................... MS TCP Loopback interface
> 0x2 ...00 16 e6 5b db 70 ...... Realtek RTL8168/8111 PCI-E Gigabit  
> Ethernet
> NIC
> - Packet Scheduler Miniport
> ====================================================================== 
> =====
> ====================================================================== 
> =====
> Active Routes:
> Network Destination        Netmask          Gateway        
> Interface  Metric
>           0.0.0.0          0.0.0.0      192.168.1.1     
> 192.168.1.60       30
>         127.0.0.0        255.0.0.0        127.0.0.1        
> 127.0.0.1       1
>       192.168.1.0    255.255.255.0     192.168.1.60     
> 192.168.1.60       30
>      192.168.1.60  255.255.255.255        127.0.0.1        
> 127.0.0.1       30
>     192.168.1.255  255.255.255.255     192.168.1.60     
> 192.168.1.60       30
>         224.0.0.0        240.0.0.0     192.168.1.60     
> 192.168.1.60       30
>   255.255.255.255  255.255.255.255     192.168.1.60     
> 192.168.1.60       1
> Default Gateway:       192.168.1.1
> ====================================================================== 
> =====
> Persistent Routes:
>   None
>
> Computer 2 on WRAP2
>
> ====================================================================== 
> =====
> Interface List
> 0x1 ........................... MS TCP Loopback interface
> 0x2 ...00 16 e6 5b db 70 ...... Realtek RTL8168/8111 PCI-E Gigabit  
> Ethernet
> NIC
> - Packet Scheduler Miniport
> ====================================================================== 
> =====
> ====================================================================== 
> =====
> Active Routes:
> Network Destination        Netmask          Gateway        
> Interface  Metric
>           0.0.0.0          0.0.0.0      192.168.2.1    192.168.2.199
> 20
>         127.0.0.0        255.0.0.0        127.0.0.1        
> 127.0.0.1       1
>       192.168.2.0    255.255.255.0     192.168.2.199    192.168.2.199
> 20
>      192.168.2.199  255.255.255.255        127.0.0.1       127.0.0.1
> 20
>     192.168.2.255  255.255.255.255     192.168.2.199    192.168.2.199
> 20
>         224.0.0.0        240.0.0.0     192.168.2.199    192.168.2.199
> 20
>   255.255.255.255  255.255.255.255     192.168.2.199     
> 192.168.1.199      1
> Default Gateway:       192.168.2.1
> ====================================================================== 
> =====
> Persistent Routes:
>   None
>
> Thanks,
>
> Beau
>
>
> -----Original Message-----
> From: Lee Sharp [mailto:leesharp at hal dash pc dot org]
> Sent: Monday, 12 February 2007 8:44 AM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] Extending factory network
>
> Beau Woods wrote:
>> Hi all,
>>
>> I have managed to set this all up with one problem.  I have set   
>> <WRAP1 AP
>> LAN 192.168.1.2   and Bridged OPT1 to LAN>  <WRAP2 BSS
>> WAN(Wireless)192.168.1.251 LAN 192.168.2.1>.  I have enabled Advanced
>> outbound NAT and created ANY,ANY,ANY rules for all interfaces on both
> boxes.
>> I made a static route on WRAP1 WAN to goto 192.168.2.0 gw  
>> 192.168.1.251.
>> Now I can ping everything from WRAP1 including the computer on WRAP2
> however
>> I cannot ping WRAP1 from the computer on WRAP2 (I can ping WRAP1 from
> WRAP2
>> WAN interface but not the LAN interface).
>
> Do a "route print" from the command line of both computers.  I am
> thinking it is a routing issue on a computer on WRAP2.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>