[ previous ] [ next ] [ threads ]
 From:  "Ron Carter" <wcarterjr at earthlink dot net>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] VIA Eden 0.13, 0.15nm vs VIA Eden 90nm
 Date:  Thu, 22 Feb 2007 19:21:23 -0500
I use a cyrix giga processor in my m0n0wall.  I have have no problems at 
all.  In fact it has been running 44 days now.  That is a record for me.  It 
is working great.
----- Original Message ----- 
From: "Lee Sharp" <leesharp at hal dash pc dot org>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, February 22, 2007 11:28 AM
Subject: Re: [m0n0wall] VIA Eden 0.13, 0.15nm vs VIA Eden 90nm

> Philippe Lang wrote:
>> Hi,
>> I've heared a lot of good things about VIA fanless processors, and had a
>> look at the VIA Epia model:
>> http://www.via.com.tw/en/products/processors/eden/
>> There seems to be much more features in the VIA Eden 90nm, according to
>> the datasheet.
>> Would anyone recommend a particular processor in order to build a
>> M0n0wall appliance? Are both processors well supported?
>> Or maybe would you recommend another VIA processor? Thanks!
> I have built a bunch of via based firewalls.  The most important thing is 
> the power supply.  The board can be the cheapest one you find, and it 
> should have plenty of power.  But the power supply must be stable, or you 
> will have nightmares.  I have had good luck with this case. 
> http://www.directron.com/2699r.html
> Lee
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch