Ok so just about any dlink minipci card should work? (A,b,g)?

Awesome info!  I can't wait to try it out!
-----------------------------------------------------------------------
Sent from my Huckleberry Wireless Handheld

-----Original Message-----
From: krt <kkrrtt at gmail dot com>
To: Hart, Benjamin <bhart at unifiedbrands dot net>
CC: m0n0wall at lists dot m0n0 dot ch <m0n0wall at lists dot m0n0 dot ch>
Sent: Fri Mar 02 13:26:24 2007
Subject: Re: [m0n0wall] m0no on net4501

m0n0wall works with 802.11G in 1.3, due to it's FreeBSD 6.x base.

The D-Link is common.

The RALink probably isn't - I yanked it out of a free toy router that
Verizon gave me with my FiOS line.  There are probably better cards
for this.

Honestly, I prefer to handle my WiFi off box and route all of the
traffic through the m0n0wall.  My Soekris is my road warrior box,
wherein I can share just about any hotel's "free" or "pay" service
with one authentication and behind a single IP.

My large regular PC parts home firewall has four 10/100 interfaces in
use at the moment, two of which have WiFi routers dangled off of them.

Note: I use the wireless routers as layer 2 access points.  They do
not handle any layer 3 packet routing, NAT or IP related services such
as DHCP or DNS proxy.  m0n0wall is my network control center.


On 3/2/07, Hart, Benjamin <bhart at unifiedbrands dot net> wrote:
> Awesome, I will definately be setting that up.  Now the two wlan references, what are the common
models for those? I would really like to have a more integrated wlan solutionn will mono ever
support 54g?
> -----------------------------------------------------------------------
> Sent from my Huckleberry Wireless Handheld
>
> -----Original Message-----
> From: krt <kkrrtt at gmail dot com>
> To: Hart, Benjamin <bhart at unifiedbrands dot net>
> CC: m0n0wall at lists dot m0n0 dot ch <m0n0wall at lists dot m0n0 dot ch>
> Sent: Fri Mar 02 13:06:35 2007
> Subject: Re: [m0n0wall] m0no on net4501
>
> Yes, m0n0wall accomodates for this handily.
>
> My 4501 has 5 interfaces that m0n0wall sees and works with.
>
> - The 3 onboard 10/100's,
>
> - a RALINK 250 in the minipci that I haven't quite tested fully (it
> shows up in 1.3b4 and .. works.. but my device might have been wonky)
>
> - A D-Link 520 A2.  I think this was a standard Soekris build as it
> fits in the Soekris Perfectly.  Works flawlessly in 1.2 and 1.3 (and
> probably others)
>
>
>
> On 3/2/07, Hart, Benjamin <bhart at unifiedbrands dot net> wrote:
> > Is it possible to utilize the 3rd ethernet port on my 4501 for WLAN?  I
> > lucked into the working 4501 and loaded/configured m0n0 surprisingly
> > easily.  I am very impressed as I will be giving the PPTP a try
> > tomorrow.  But I do have two desktops and a laptop and I must still
> > connect wirelessly to my "old" SMC wireless router.  I'm using just the
> > wlan portion but I feel as though I'm less secure than I should be.  I'd
> > like to follow the kaos theory guide and segregate my lan, wan and wlan
> > using the three ports on the soekris.  Is this possible?
> >
> > thanks!
> > Ben
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>