Please provide us with a full status file
And a dump of the radius attributes you're sending to the M0n0wall

Apparently you are doing something wrong there since per-user shaping has
been tested and works.

Kind Regards,

Jonathan

> -----Oorspronkelijk bericht-----
> Van: Adam Armstrong [mailto:lists at memetic dot org]
> Verzonden: donderdag 22 maart 2007 17:40
> Aan: m0n0wall at lists dot m0n0 dot ch
> Onderwerp: RE: [m0n0wall] Captive Portal Issues
> 
> > Lee Sharp wrote:
> > > Peter Boosten wrote:
> > >>
> > >> I suggest you upgrade to 1.23. Version 1.22 had no problems either
> > (with
> > >> Radius).
> > >
> > > Not totally true.  There were some problems with CP redirect hangs,
> > and
> > > they seemed to be related to the php.core problem.  That is resolved,
> > > along with an annoying log bug, in 1.23, so I would go there.
> > >
> 
> Hi All,
> 
> I installed a new device with a clean 1.24 installation and setup the
> captive portal like thus :
> 
> WAN===m0n0===AP/Switch===AP/Switch=/\/=laptop
> 
> Everything worked fine. I could attach 5 laptops to the wifi, using both
> APs
> and it all worked fine.
> 
> The issues reappeared as soon as i enabled the per-user traffic shaping.
> Once that was enabled as soon as i sent a user/pass to the portal it
> stopped
> sending me any traffic at all!
> 
> I could still reach the m0n0 admin interface, which showed that i was
> sending traffic (the captive portal status page) but that no traffic was
> being sent to me!
> 
> I've disabled that, and just turned on traffic shaping on the WAN
> interface,
> which is good enough for now.
> 
> I'm not sure if it was my errors or a bug, but i thought it wise to report
> what the issues i hit and what i've done as workaround.
> 
> Thanks,
> Adam.
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch