Sorry I didn't reply back to the list before. To reiterate, I'm using cable
on both sides, not adsl.
I noticed that the ifconfig was dying when it should output the ipv6
address, so I blacklisted the ipv6 modules, restarted, still no luck.
On 6/16/07, Alex Neuman <alex at nkpanama dot com> wrote:
> The only time I've seen this is when there is an MTU problem, which seem
> to coincide with the use of ADSL links.
> Try lowering the MTU to 1400 in every device, one by one, starting from
> your computer outwards up to the device you're trying to access. If this
> doesn't work, let us know.
> > Hello,
> > I'm loving m0n0wall, nice work! I'm using a soekris net4501 as a
> > bridge to manage bandwidth for a diverse network. I have a /28 subnet of
> > public ips that I'm passing through the net4501 from wan to opt1 to a
> > switch
> > connecting:
> > * Astlinux (though soon to be askoziaPBX) on WRAP
> > * m0n0wall on a WRAP acting as a NAT and router for our office lan
> > * a couple of public servers
> > This allows our lan computers to access the public servers, which you
> > can't
> > do when using 1:1 or server NAT AFAIK.
> > Everything is working well, and I have the inner m0n0wall (the one on
> > WRAP behind the filtered bridge) connecting a VPN out to another
> > That still works fine, except I'm noticing some very odd behavior. If I
> > ssh
> > over the VPN to a a device on the remove lan and run one of the
> > commands:
> > * ifconfig
> > * ps -A
> > something goes haywire and the shell is dropped. The process doesn't
> > as
> > I can login through the public ip and watch the top of my user and see
> > sshd
> > and bash continue to run after the screen buffer in the other shell
> > through
> > the vpn stops responding.
> > I'm wondering if I'm doing something that goes against good network
> > here, or if this is a sign of something that is mis-configured and needs
> > to
> > be fixed. I appreciate any advice - thanks!
> > Al
> > --
> > My Blogs:
> > http://www.docunext.com/
> > http://www.albertlash.com/
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch