[ previous ] [ next ] [ threads ]
 From:  "Rick Preston" <rickjpreston at gmail dot com>
 To:  "Marty Nelson" <MNelson at transdyn dot com>
 Cc:  "m0n0wall at lists dot m0n0 dot ch" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] NAT an internal address to a DMZ address?
 Date:  Wed, 30 May 2007 16:30:12 -0400
On 5/30/07, Marty Nelson <MNelson at transdyn dot com> wrote:
> My internal subnet is 192.168 and my DMZ is 10.100, and what I need to do is NAT a handful of
internal addresses to DMZ addresses, and I'm not sure about how to best accomplish that task.
> Any help would be appreciated.
> Thanks,
> -Marty


To be honest I'm not sure what you are asking for.  Do you just need
to access some machines in you DMZ from your LAN (by name instead of
IP)?  Or do you have something else in mind?

I'm no expert, nor well read on the subject but I don't recall ever
hearing about using NAT between two private address spaces.  Only
between a private and public address space.

My guess is you are looking for something like this

If not, maybe post some more information.