[ previous ] [ next ] [ threads ]
 
 From:  "Dan Bond" <dan dot bond at gmail dot com>
 To:  monowall <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Multiple NICS on Lan Side
 Date:  Tue, 3 Jul 2007 23:36:18 +0100
Surely if it's 192.168.2.0/24, then that's the whole of the subnet.
Have you tried changing the subnet mask to something different?

Dan Bond

On 03/07/07, Richard StClair <stclair at niue dot nu> wrote:
> Hi,
>
> Soekris 4501 with MW 1.3b2.
>
> WAN eth0        192.168.1.0/24 with an IP of 192.168.1.200
>
> LAN eth1        192.168.2.0/24 with an IP of 192.168.2.200
> Works Great.
>
> Shouldn't I be able to add:
>
> opt1    eth2    192.168.2.201/24 in same subnet as the LAN on eth1?
>
> I've tried it and can't get anything to route through it.
>
> I've done the firewall rules for opt1.
>
> I think it should just work.
>
> If I change opt1 to a separate subnet like 192.168.3.0/24 then it all
> comes right and works.
>
> Does every nic have to be on a separate subnet to work?
>
> I want to be able to add IPs to each nic and have them all on the same
> subnet on the lan side.
>
> Am I trying to do something that can't be done?
>
> --
> Regards,
> Richard St Clair,
> Co-Founder & Internet Evangelist,
> Internet Users Society Niue,
> --------------------------------------------
> "To Provide Internet Access to Undeveloped Areas of the World"
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>