Thank you. Most likely I'll do it on Linux and I think I should be
able to avoid ifconfig'ing the extra NICs in the main/host OS and only
have them configured inside the m0n0wall VM.

Glad to hear this works!


On 7/16/07, Paulo Meireles <subscribe dash m0n0wall at exxpert dot com> wrote:
> I have been running m0n0wall for quite a long time under VMware ESX, and
> it works beautifully. It should be no problem to run it under VMware
> Server. Just make sure that the virtual SCSI controller is LSI Logic.
> If you're running VMware on top of Windows, please be sure to unbind
> (disable from the interface) every protocol from the network interface
> exposed to the Internet (especially TCP/IP), except the VMware Bridging
> Protocol. This way, Windows won't be exposed to Internet traffic.
> Equivalent measures should be taken if VMware is being run on Linux.
>
> Paulo Meireles
>
> -------- Mensagem Original --------
> Assunto: [m0n0wall] Running m0n0wall inside VWMware
> De: Brian McEntire <brian dot mcentire at gmail dot com>
> Para: m0n0wall at lists dot m0n0 dot ch
> Data: 16-07-2007 15:49
> > Has anyone run monowall inside VMWare? Is it pretty simple to boot up
> > just like a normal machine and load a config saved from a physical
> > host?
> >
> > I have an old computer that may or may not be plaguing my cable modem
> > connection with high latency. I'd like to test my current config
> > inside a VM on a more modern machine to help isolated the problem.
> >
> > Any thoughts?
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>