[ previous ] [ next ] [ threads ]
 
 From:  Lee Sharp <leesharp at hal dash pc dot org>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Multiple subnets
 Date:  Wed, 18 Jul 2007 11:41:29 -0500
Sean Hogan wrote:

> Our WAN interface (Which connects to our wireless gear) has an address 
> of 10.1.1.250. The two customers each have blocks of IP's. Customer A is 
> on the OPT1 interface has a single /29. The other, customer B, is 
> connected to the LAN interface, has a /27 and a /29.

Does he have a real /27 and /29, or addresses in that range in an 
ethernet interface?  If he has a router with the /29 IP, and the /27 IP 
inside, you need a static route for the /27 via the /29 in m0n0wall.  If 
he is multinetting, it gets much messier.  It can be done, but it is a 
dirty hack.

			Lee