[ previous ] [ next ] [ threads ]
 
 From:  "Atkins, Dwane P" <ATKINSD at uthscsa dot edu>
 To:  "Lee Sharp" <leesharp at hal dash pc dot org>, "Monowall Support List" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Reboot
 Date:  Thu, 2 Aug 2007 05:18:17 -0500
It has expanded for later versions, correct?  And this is what I had
thought.  All logs, arps, DHCP, etc...write to this log.  I have
decrease my DHCP lease time to 2 hours.

Is there a way to decrease active ARP time?

Dwane

-----Original Message-----
From: Lee Sharp [mailto:leesharp at hal dash pc dot org] 
Sent: Wednesday, August 01, 2007 5:12 PM
To: Monowall Support List
Subject: Re: [m0n0wall] Reboot

Atkins, Dwane P wrote:
> OK.
> 
> Can someone explain what each of these are:
> 
> Filesystem 512-blocks  Used Avail Capacity  Mounted on
> /dev/md0c       21758 21086   672    97%    /
> procfs              8     8     0   100%    /proc
> /dev/fd0         2849    50  2799     2%    /cf
> 
> I was assuming that /dev/md0c, which is now 97% full, was memory and
> that /dev/fd0 was the compact flash.  What would the /cf be then?

My mistake...  The cf card is mounted, but the image on the cf card is 
not.  Nothing is written to the cf other than the dyndns cache and the 
config. Root is all in the ram disk, which is 11 meg, no mater what ram 
or hard drive you have.  And all my system on the 1.2x core run at 
93%...  There was much talk of expanding it, but some people with 16 meg

CF devices had trouble with 16 meg images.  (16 meg binary != 16 meg 
marketing)  The point I was making is that with a 1 gig cf card, he 
would still be 93% full.  Sorry for being unclear, and yes it is
confusing!

			Lee

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch