[ previous ] [ next ] [ threads ]
 
 From:  Paul Rae <paul at impacttrainingsolutions dot co dot uk>
 To:  peter green <pcg at agathongroup dot com>, m0n0wall <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] DHCP and bridged interfaces
 Date:  Wed, 22 Aug 2007 18:30:51 +0100
I run this setup without any issue at all.

Obvious things that springs to mind, do you have rules to allow traffic to
and from both interfaces? By default it will not do this.


On 22/8/07 00:43, "peter green" <pcg at agathongroup dot com> wrote:

> Hello all,
> 
> I've been checking the list archives, as well as the forum (and posted in
> there), but haven't been able to find out what is wrong here.
> 
> I have a WRAP box with two wired interfaces (WAN/sis1 and Wired/sis0) and
> one wireless (LAN/ath0 via a mini-PCI card).  Running m0n0wall 1.3b2.  Wired
> is bridged with LAN (192.168.2.1/24).  DHCP server is set to run on "LAN
> interface" and hand out 192.168.2.110-199.  "Deny unknown clients" is not
> checked.
> 
> When I check the logs, it says the DHCP server is running on and handing out
> IPs "via ath0", including at boot:
> 
>   dhcpd: Listening on BPF/ath0/00:0b:6b:0a:81:f4/192.168.2/24
>   dhcpd: Sending on BPF/ath0/00:0b:6b:0a:81:f4/192.168.2/24
>   dhcpd: Sending on Socket/fallback/fallback-net
> 
> However, I cannot actually get an IP on the wireless network; only wired
> clients are getting IP addresses.
> 
> Is there some problem with running the DHCP server on a bridged connection
> to serve both my wired and wireless internal clients on the same internal
> network (192.168.2.0/24)?
> 
> Thanks in advance for any help!
> 
> /pg