On 8/28/07, Joe Lagreca <joe at bignetonline dot com> wrote:
>
> I setup a third interface card in my m0n0wall, called OPT1.
>
> I want to put my trixbox on that OPT1 interface with NO NAT (trixbox
> and VOIP don't seem to play well with NAT).
>
> Here is the tricky part, the WAN interface connects via PPPOE to get
> its IP address and other network information.  I initially tried to
> bridge OPT1 with the WAN, and then assign my trixbox one of their
> available IP's.  The trixbox takes the IP address with no problems,
> however it won't take the gateway IP address (192.0.2.100), probably
> because its not on the same subnet as the IP address.
>
> Are their any other ways to get my trixbox working behind my m0n0wall
> without using NAT?  I have 6 external IP's.  Thanks!
>


How about 1:1 NAT or server NAT and leaving trixbox on your lan?

I have an asterisk machine behind m0n0 using NAT without a problem. Unlike
Chris, I had to open up some ports.

JC