I've been checking the list archives, as well as the forum (and posted in
there), but haven't been able to find out what is wrong here.
I have a WRAP box with two wired interfaces (WAN/sis1 and Wired/sis0) and
one wireless (LAN/ath0 via a mini-PCI card). Running m0n0wall 1.3b2. Wired
is bridged with LAN (192.168.2.1/24). DHCP server is set to run on "LAN
interface" and hand out 192.168.2.110-199. "Deny unknown clients" is not
When I check the logs, it says the DHCP server is running on and handing out
IPs "via ath0", including at boot:
dhcpd: Listening on BPF/ath0/00:0b:6b:0a:81:f4/192.168.2/24
dhcpd: Sending on BPF/ath0/00:0b:6b:0a:81:f4/192.168.2/24
dhcpd: Sending on Socket/fallback/fallback-net
However, I cannot actually get an IP on the wireless network; only wired
clients are getting IP addresses.
Is there some problem with running the DHCP server on a bridged connection
to serve both my wired and wireless internal clients on the same internal
Thanks in advance for any help!
Peter Green : Agathon Group : pcg at agathongroup dot com