You don't have any NAT rules. Go to Inbound NAT as others said
previously and add it properly.


On 9/12/07, Brieseneck, Arne, VF-Group <Arne dot Brieseneck at vodafone dot com> wrote:
> <?xml version="1.0"?>
> <m0n0wall>
>     <version>1.6</version>
>     <lastchange>1189620245</lastchange>
>     <system>
>         <hostname>dmzfw</hostname>
>         <domain>local</domain>
>         <dnsallowoverride/>
>         <username>admin</username>
>         <password>xxxxx</password>
>         <timezone>Europe/Berlin</timezone>
>         <time-update-interval>300</time-update-interval>
>         <timeservers>192.168.50.129</timeservers>
>         <webgui>
>             <protocol>http</protocol>
>             <port/>
>         </webgui>
>     </system>
>     <interfaces>
>         <lan>
>             <if>vxn1</if>
>             <ipaddr>192.168.50.185</ipaddr>
>             <subnet>26</subnet>
>             <media/>
>             <mediaopt/>
>         </lan>
>         <wan>
>             <if>vxn0</if>
>             <mtu/>
>             <media/>
>             <mediaopt/>
>             <ipaddr>10.5.40.20</ipaddr>
>             <subnet>24</subnet>
>             <gateway>10.5.40.1</gateway>
>             <spoofmac/>
>         </wan>
>     </interfaces>
>     <staticroutes>
>         <route>
>             <interface>wan</interface>
>             <network>192.168.61.0/24</network>
>             <gateway>10.5.40.120</gateway>
>             <descr>Rückroute zum WIMAX</descr>
>         </route>
>     </staticroutes>
>     <pppoe/>
>     <pptp/>
>     <bigpond/>
>     <dyndns>
>         <type>dyndns</type>
>         <username/>
>         <password/>
>         <host/>
>         <mx/>
>         <server/>
>         <port/>
>     </dyndns>
>     <dnsupdate/>
>     <dhcpd>
>         <lan>
>             <range>
>                 <from>192.168.1.100</from>
>                 <to>192.168.1.199</to>
>             </range>
>         </lan>
>     </dhcpd>
>     <pptpd>
>         <mode/>
>         <redir/>
>         <localip/>
>         <remoteip/>
>     </pptpd>
>     <dnsmasq>
>         <enable/>
>     </dnsmasq>
>     <snmpd>
>         <syslocation/>
>         <syscontact/>
>         <rocommunity>public</rocommunity>
>     </snmpd>
>     <diag>
>         <ipv6nat>
>             <ipaddr/>
>         </ipv6nat>
>     </diag>
>     <bridge/>
>     <syslog/>
>     <nat/>
>     <filter>
>         <rule>
>             <type>pass</type>
>             <interface>wan</interface>
>             <source>
>                 <any/>
>             </source>
>             <destination>
>                 <any/>
>             </destination>
>             <descr/>
>         </rule>
>         <rule>
>             <type>pass</type>
>             <interface>lan</interface>
>             <source>
>                 <any/>
>             </source>
>             <destination>
>                 <any/>
>             </destination>
>             <descr/>
>         </rule>
>     </filter>
>     <shaper/>
>     <ipsec/>
>     <aliases/>
>     <proxyarp/>
>     <wol/>
>     <vlans>
>         <vlan>
>             <if>vxn0</if>
>             <tag>4</tag>
>         </vlan>
>         <vlan>
>             <if>vxn1</if>
>             <tag>3</tag>
>         </vlan>
>     </vlans>
> </m0n0wall>
>
> -----Original Message-----
> From: Chris Buechler [mailto:cbuechler at gmail dot com]
> Sent: Mittwoch, 12. September 2007 06:31
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] RE: SSH rule dows not work
>
> On 9/11/07, Brieseneck, Arne, VF-Group <Arne dot Brieseneck at vodafone dot com> wrote:
> > How can I download this from the system?
> >
>
> status.php, config.xml
>
> -Chris
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>