On 9/12/07, Lynn Grant <lgrant at adamscon dot com> wrote:
> I am trying to direct the logs from two M0n0walls to the Kiwi Syslog
> Service running on a Windows machine.
> The first box, Blackout, is on the 192.168.3.x network.
> The second box, BlackBeauty, is on the 192.168.1.x network, and talks to
> the first box through an IPSEC VPN. The WAN interfaces of both boxes are
> connected to the Internet. The boxes are about three miles apart.
> The logging for both machines is directed to 192.168.3.200, a Windows
> machine on the first box's network, and running the Kiwi Syslog Service.
> I am not getting any logging messages from either machine. The Kiwi
> Syslog Service is set up to receive UDP syslog messages on port 514.
> It just occurred to me that perhaps the M0n0wall is sending the syslog
> messages out the WAN interface, rather than out the LAN or VPN. I would
> think that the routing table would direct it to the appropriate
> interface to get to the 192.168.3.200 machine, but I'm still not
> completely up to speed on this.
> Could this be the problem?
Yes, see FAQ on SNMP over VPN (same thing).