[ previous ] [ next ] [ threads ]
 
 From:  "Mats Lundqvist" <mats dot lundqvist at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: Howto manually insert conf into CF? I need it for Firebox 2.
 Date:  Wed, 24 Oct 2007 12:15:24 +0200
Wait a minute.....Maybe, if I insert a (working) conf into an iso, and
boot from a cdrom (instead of an imaged drive), I can then dd m0n0wall
to the built in flash?

Does the firebox support booting from cdrom?

/Mats

2007/10/24, Mats Lundqvist <mats dot lundqvist at gmail dot com>:
> Hi
>
> I've got a Firebox II that I wanted to convert to a m0n0wall FW, and
> use the built in flash.
>
> When reading this page:
> http://www.ls-net.com/m0n0wall-watchguard/
>
> I saw I needed to make a keyboard connection from leftover parts of an
> AT-computer, but I don't have any of those parts.
>
> So I figured I could write the generic pc image to a 2.5" hdd and
> connect it, reset the bios and let the hdd boot without any "help".
>
> But to make this work I need to preconfigure the interfaces in the
> conf, so that I can get access to the webGUI. Does someone have a conf
> / image of m0n0wall 1.23 that you are willing to share?
>
> Or can someone tell me what NICs the Firebox 2 uses? And how to insert
> a conf into an image or CF?
>
> Cheers!
> --
> Mats Lundqvist
> +4670-513 73 87
>


-- 

Mats Lundqvist
+4670-513 73 87