|
||||||||||
Try changing the drive parameters even though they are set automatically. I had to manually set mine to LBA. Henning Andreseck wrote: > the parameters are set automatically. everything seems to be > fine...any other os has no problem with running on the mashine... > > > Michel Servaes schrieb: >> The drive geometry params... like Cylinders Heads Sectors... >> LBA >> >> that kind of stuff... >> >> >> I have installed mine on a CF card (512MB), and had to manually enter >> them in the bios - otherwise it even wouldn't find my CF card. (but >> that has nothing to do with monowall or any other OS) >> >> Henning Andreseck schreef: >>> Hi, any other system works (like debian/linux oder windows) the hdd >>> si master, no cable select. >>> what exactly do you mean with the "drive paramters" in the bios? >>> >>> >>> Michel Servaes schrieb: >>>> - I would firstly check the drive parameters being correct in the >>>> BIOS. >>>> - Check master/slave >>>> - Do not use Cable Select >>>> >>>> I created the image using physdiskwrite, as a true administrator, >>>> on a Vista64 system... before I did this using my account (with >>>> elevated rights), which did not work (and gave me the same problem >>>> as you have, but you're doing it otherwise, so that wouldn't be it) >>>> >>>> Henning Andreseck schreef: >>>>> Hi, >>>>> i just tried to set up a m0n0wall. I booted from the dsl-cd, >>>>> downloaded the generic-pc-image und wrote it to the disc using >>>>> gunzip -c generic-pc-xxx.img | dd of=/dev/hda bs=16k >>>>> but it doesnt work. when i boot is just says "Read Error". I tried >>>>> it with as askozia as well, same error. >>>>> you have some ideas? >>>>> thanks >>>>> >>>> >>>> --------------------------------------------------------------------- >>>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch >>>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch >>>> >>> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch >> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch >> > |