|
||||||||
Just to add ... wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 210.55.15.196 netmask 0xfffffff8 broadcast 210.55.15.199 ether 00:02:6f:08:36:9c media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) status: associated ssid ConceptLink22 1:ConceptLink22 stationname mit.unix.co.nz channel 2 authmode OPEN powersavemode OFF powersavesleep 100 wepmode OFF weptxkey 1 wi1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.23.14.2 netmask 0xffffff00 broadcast 10.23.14.255 ether 00:02:6f:07:30:9c media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps <hostap>) status: associated ssid mit.unix.co.nz 1:mit.unix.co.nz stationname "Link to Base" channel 11 authmode OPEN powersavemode OFF powersavesleep 100 wepmode OFF weptxkey 1 It would seem the wi1 interface is set to DS/2Mbps, how do you change that to 11Mbps? Thanks Barry -----Original Message----- From: Barry Murphy [mailto:barry at unix dot co dot nz] Sent: Saturday, 14 February 2004 11:36 a.m. To: m0n0wall at lists dot m0n0 dot ch Subject: [m0n0wall] Bandwidth restriction of hostap Hi, My network layout is as follows: http://www.unix.co.nz/~icepick/albanywireless.jpg -When connecting directly to BASE.unix.co.nz I get a full 5.5MB / sec (MRTG shows 4.8M/s) -When connecting from local lan -> m0f0 I get a full 5.5MB / sec, -When a client connects to the AP MIT.unix.co.nz and downloads from m0f0, they get 5.5MB / sec (MRTG shows 960kb/s) -however, when a client is connected to MIT.unix.co.nz and they download from noddy, they only get about 80-150KB/s. MIT is a hostap system on m0n0, I believe the restriction is on m0n0. I have tried setting a client (connected to MIT) to have their default gateway as noddy, and speed restrictions remain. So in theory, noddy and DownloadClient are both 'clients' of the MIT.unix.co.nz AP and when transferring between each other, they get crappy bandwidth. MRTG graphs show Does anyone have any ideas why users are getting such slow speeds when talking from client to client over hostap. Thanks Barry --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |